Cutting bulkheads

I haven’t had any time to work with my Blade for the last three weeks, but finally today I had couple of extra hours, so I managed to cut one sheet of Okume plywood.

Cutting Transom

In the picture above the main decks, one of the transoms and the bulkhead 15 has been already cut out and cutting last transom is still in progress. The following picture shows todays work, the bulkheads 3+8+15, the transoms and the main decks. The bulkheads and transoms still need to be trimmed and interior needs to be cut out from bulkheads.
Bulkheads and main decks

Leave a Reply

To prove you're a person (not a spam script), type the answer to the math equation shown in the picture. Click on the picture to hear an audio file of the equation.
Click to hear an audio file of the anti-spam equation

Why ask?