Shaping the hulls and some glassing

Since last post I glued the main decks and after decking it was time for some trimming. I decided to start from the bows. The electric plane was again very useful :). The Blade has reverse rake in the bow so in the first picture the hulls have turtled.
Trimming bows Bow shaped

After the bows was trimmed, it was time to cut the decks and round the gunwales. Also fore deck was shaped from foam at the same time. At this point the hulls started to look like catamaran hulls, so maybe it will float after all.

Trimming decks

Yesterday and today I glassed decks and epoxied rest of the hulls. At this point only “some” fairing needs to be done before painting ;).
Glassing decks Epoxying hulls

Leave a Reply

To prove you're a person (not a spam script), type the answer to the math equation shown in the picture. Click on the picture to hear an audio file of the equation.
Click to hear an audio file of the anti-spam equation

Why ask?